One tray of TB PROFANS contains 400 pre-made sharp base fans!

A last step solution that is designed to be applied only where the adhesive is bonded to the natural lash! Increase your retention by 30% and reduce excess fumes.  It is ideal to use on all clients that wear classic, volume, and mega volume. This will be your final step of your set. Professional Use Only.

Our TB Super Bonder instantly eliminates fumes caused by adhesive and seals the adhesive to a perfect non-pourous bond. Wonderful especially for those with sensitivities or slight irritations to curing adhesives by eliminating the source of the fumes, and therefore, the irritation. When using on volume and mega volume fans, make sure you don’t saturate the fan, but apply only a small amount with a micro swab to the very base of the extensions, only where the adhesive bonds to the natural eyelash.

How to use:

• Grab 2 Lint Free Microswabs (one for each eye) and apply a tiny amount of the TB Super Bonder on the area where the extensions are attached. Dab off any excess solution onto paper towel if needed.
• Do not saturate volume or mega fan, only apply where the adhesive bonds to the natural lash.
• Do not apply on skin.
• Wait 2-4 minutes after completed set before applying the TB Super Bonder.
• Do not use Nanomister or Nebulizer at anytime when using TB Super Bonder.

• Light Liquid Consistency 

• 1 Second Drying Time

• Classic and Volume Lash Extensions

• Up to 7 Week Hold

• No Fumes

What is humidity? Humidity levels describe the amount of water vapor present in the air.

How does humidity affect professional eyelash adhesives? Water vapor will change lash adhesive drying time. The higher the humidity level, the slower your adhesive will dry. The lower the humidity level, the quicker the adhesive will dry.

What should the humidity be in my lash salon? Lash salons should be in the humidity range of 45% to 55%.