• .05 second dry time

• Intended for advanced lash artists

• up to 8 weeks retention

What is humidity? Humidity levels describe the amount of water vapor present in the air.

How does humidity affect professional eyelash adhesives? Water vapor will change lash adhesive drying time. The higher the humidity level, the slower your adhesive will dry. The lower the humidity level, the quicker the adhesive will dry.

What should the humidity be in my lash salon? Lash salons should be in the humidity range of 45% to 55%.

• Light Liquid Consistency 

• 1 Second Drying Time

• Classic and Volume Lash Extensions

• Up to 7 Week Hold

• No Fumes

What is humidity? Humidity levels describe the amount of water vapor present in the air.

How does humidity affect professional eyelash adhesives? Water vapor will change lash adhesive drying time. The higher the humidity level, the slower your adhesive will dry. The lower the humidity level, the quicker the adhesive will dry.

What should the humidity be in my lash salon? Lash salons should be in the humidity range of 45% to 55%.

A last step solution that is designed to be applied only where the adhesive is bonded to the natural lash! Increase your retention by 30% and reduce excess fumes.  It is ideal to use on all clients that wear classic, volume, and mega volume. This will be your final step of your set. Professional Use Only.

Our TB Super Bonder instantly eliminates fumes caused by adhesive and seals the adhesive to a perfect non-pourous bond. Wonderful especially for those with sensitivities or slight irritations to curing adhesives by eliminating the source of the fumes, and therefore, the irritation. When using on volume and mega volume fans, make sure you don’t saturate the fan, but apply only a small amount with a micro swab to the very base of the extensions, only where the adhesive bonds to the natural eyelash.

How to use:

• Grab 2 Lint Free Microswabs (one for each eye) and apply a tiny amount of the TB Super Bonder on the area where the extensions are attached. Dab off any excess solution onto paper towel if needed.
• Do not saturate volume or mega fan, only apply where the adhesive bonds to the natural lash.
• Do not apply on skin.
• Wait 2-4 minutes after completed set before applying the TB Super Bonder.
• Do not use Nanomister or Nebulizer at anytime when using TB Super Bonder.

This Glue lashes up to 7 weeks! Very thin consistency and rapid dry makes Volume Lashing so much easier. It has the best retention on the market and significantly helps to reduce the service time . 

It works best in humidity between 40%-60%(Recommended 40%) and temperature 60-73 degrees. Recommended for more humid climates . 

Size:                         5ML

Dry time:                  1-2 seconds

Viscosity:                  Low-medium

Flexibility:                 Medium

Intended for:            Experienced Artist, Classic or Volume Technique

Retention:                 Up to 5 weeks

Ideal Temperature:   69-72 degrees Fahrenheit

Ideal Humidity:         40-60% RH (Relative humidity)

***ALL EYELASH EXTENSIONS ADHESIVES SHOULD BE REPLACED EVERY 4-6 WEEKS.  USING A FRESH, CLEAN GLUE IS INCREDIBLY CRUCIAL TO MINIMIZE AND AVOID ALLERGIES AND IRRITATION***

Eyelash Extension Gel Remover 15ML

This makeup remover for eyelash extensions also removes dirt and oils without risking your retention.

IT IS VERY IMPORTANT TO FOLLOW THESE INSTRUCTIONS WITH EACH USE OF THIS EYELASH WASH:

1. Shake cleanser for eyelash extensions well each time before dispensing.

2. Dilute lash cleanser with several drops of water in your hand before applying to lashes.

3. After each application of TB Foam Eyelash Cleanser make sure to rinse eyes thoroughly with water to remove any excess residue.

Professionally Designed By TB Lashes.Brows.Beauty